CVE-2026-128907

DJI AeroScope Mobile: Missing authentication on the management interface

  • Medium 4.3

Description

Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available.

Key facts

Published
13 Nov 2026
Last changed
13 Nov 2026
Assigned by
NCSC.ch
EPSS
0.215% likely to be exploited in the next 30 days, higher than 11.946% of CVEs (scores for 15 Nov 2026)

Severity scores

Each score is shown as its source gave it. They are not averaged or merged.

  • 4.3CVSS 3.1, Mediumfrom the CNA (NCSC.ch)CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N

What to do

  • DJI AeroScope Mobile has been discontinued and is no longer supported by DJI. No fixed firmware is available. Operators should plan to replace affected units with a supported product and, until then, apply the workarounds.CNA solution statement
  • Connect the unit's management Ethernet port only to an isolated network segment with no untrusted hosts, and do not route or bridge that segment to other networks, so that TCP port 16000 and the multicast discovery traffic (225.0.0.37, UDP port 16001) cannot be reached. Restrict physical access to the USB operator port.CNA workaround statement

Historical context and remediation

This reference retains the original CVE publication date. A recent record update does not mean a new attack occurred.

No separately sourced impact summary is available on this page yet. Consult the description, version data and dated exploitation evidence.

Version statuses below come from the CNA. An “unaffected” version is not necessarily a currently supported release or proof of a patch date. EPSS is a dated risk estimate, not a count of historical attacks.

Read the original CVE record.

Affected products

VendorProductVersions
DJIAeroScope Mobile (TP703)
  • Default status: unknown
  • 03.00.00.26 (affected)
DJIAeroScope Mobile (TP703) 1300 communications board firmware
  • Default status: unknown
  • 02.00.07.12 up to and including 02.00.08.40 (affected)

Timeline

  1. 25 Sep 2026 Confirmed on a physical device
  2. 25 Sep 2026 Reported to DJI
  3. 4 Nov 2026 DJI acknowledged the vulnerability and provided its assessment
  4. 13 Nov 2026 Published

Weakness

References