CVE-2026-19576
Stack out-of-bounds write in the Goodix GT911 touch controller driver from an unvalidated device-reported touch point count
- Medium 6.8
Description
The Goodix GT9xx input driver in drivers/input/input_gt911.c reads the touch point count from the controller's status register and masks it with GT911_TOUCH_POINTS_MSK (0x0F), yielding a value of 0..15. In gt911_process() that value is used directly as the loop bound for filling point_reg[], a stack array sized to CONFIG_INPUT_GT911_MAX_TOUCH_POINTS, whose Kconfig range is 1..5 with a default of 1. No other check constrains the count; the driver relied only on a comment asserting that the controller had been programmed at init to report no more points than configured. Each loop iteration issues an I2C read of eight bytes straight into point_reg[i], so a controller that reports more points than the array holds causes up to 112 bytes of peer-supplied data to be written past the end of the array, over the stack frame of gt911_process() in the system workqueue thread. Two further loops then read out of bounds from the same array. Triggering it requires control of, or the ability to substitute, the I2C touch controller — plausible on the many supported boards where the GT9xx panel is a pluggable display module or shield rather than an on-PCB part; a spoofed device need only answer the init probes with a supported product ID and a checksum-valid config blob. The same overflow can also occur non-adversarially, with a GT9271-class panel that ignores the driver's touch-count programming and reports up to ten points, or with bus corruption of the single status byte. The impact is an out-of-bounds stack write with fully attacker-chosen content executing at kernel privilege, i.e. potential control-flow hijack on the host MCU, in addition to out-of-bounds reads and crashes. The attack vector is physical/local hardware access only; there is no network, USB, or syscall path to the defect. The fix clamps the reported count with min() against CONFIG_INPUT_GT911_MAX_TOUCH_POINTS before any array indexing.
Key facts
- Published
- 11 Oct 2026
- Last changed
- 4 Nov 2026
- Assigned by
- zephyr
- EPSS
- 0.169% likely to be exploited in the next 30 days, higher than 6.385% of CVEs (scores for 18 Nov 2026)
- SSVC (CISA)
- Exploitation: none; Automatable: no; Technical impact: total
Severity scores
Each score is shown as its source gave it. They are not averaged or merged.
- 6.8CVSS 3.1, Mediumfrom the CNA (zephyr)
CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Historical context and remediation
This reference retains the original CVE publication date. A recent record update does not mean a new attack occurred.
No separately sourced impact summary is available on this page yet. Consult the description, version data and dated exploitation evidence.
No explicit remediation statement is available on this page yet. Consult the original record and vendor references before choosing a fix.
Version statuses below come from the CNA. An “unaffected” version is not necessarily a currently supported release or proof of a patch date. EPSS is a dated risk estimate, not a count of historical attacks.
Affected products
| Vendor | Product | Versions |
|---|---|---|
| zephyrproject | zephyr |
|
Timeline
- 11 Oct 2026 Published