CVE-2026-44415

Vulnerability record

  • Critical 9.1

Description

Affected systems do not properly restrict access to internal APIs and paths for authenticated users. This could allow an authenticated remote attacker to access sensitive internal information, which in the worst case could be leveraged to facilitate unauthorized access to the system or result in the deletion of data.

Key facts

Published
13 Oct 2026
Last changed
14 Oct 2026
Assigned by
siemens
EPSS
0.477% likely to be exploited in the next 30 days, higher than 41.892% of CVEs (scores for 18 Nov 2026)
SSVC (CISA)
Exploitation: none; Automatable: no; Technical impact: total

Severity scores

Each score is shown as its source gave it. They are not averaged or merged.

  • 9.1CVSS 3.1, Criticalfrom the CNA (siemens)CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H
  • 8.9CVSS 4.0, Highfrom the CNA (siemens)CVSS:4.0/AV:N/AC:L/AT:P/PR:H/UI:N/VC:H/VI:H/VA:H/SC:H/SI:H/SA:H

Historical context and remediation

This reference retains the original CVE publication date. A recent record update does not mean a new attack occurred.

No separately sourced impact summary is available on this page yet. Consult the description, version data and dated exploitation evidence.

No explicit remediation statement is available on this page yet. Consult the original record and vendor references before choosing a fix.

Version statuses below come from the CNA. An “unaffected” version is not necessarily a currently supported release or proof of a patch date. EPSS is a dated risk estimate, not a count of historical attacks.

Read the original CVE record.

Affected products

VendorProductVersions
SiemensIndustrial Edge Device Kit - arm64 V1.10
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.11
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.12
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.13
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.14
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.15
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.16
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.17
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.18
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.19
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.20
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.21
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.22
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.23
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.24
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.25
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.26
  • Default status: unknown
  • 0 up to but excluding V1.26.2-1 (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.27
  • Default status: unknown
  • 0 up to but excluding V1.27.1-1 (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.28
  • Default status: unknown
  • 0 up to but excluding V1.28.0-6 (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.5
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.6
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.7
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.8
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - arm64 V1.9
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.10
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.11
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.12
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.13
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.14
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.15
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.16
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.17
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.18
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.19
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.20
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.21
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.22
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.23
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.24
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.25
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.26
  • Default status: unknown
  • 0 up to but excluding V1.26.2-1 (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.27
  • Default status: unknown
  • 0 up to but excluding V1.27.1-1 (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.28
  • Default status: unknown
  • 0 up to but excluding V1.28.0-6 (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.5
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.6
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.7
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.8
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensIndustrial Edge Device Kit - x86-64 V1.9
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1000 Unified Comfort Panel
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1000 Unified Comfort Panel hygienic
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1000 Unified Comfort Panel hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1000, Unified Comfort Panel neutral
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Comfort Pro for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Comfort Pro for support arm (expandable, round tube) and extension unit
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Comfort Pro for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Comfort Pro neutral design for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (expandable, round tube) and extension
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Comfort Pro neutral design for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Unified Comfort Panel
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Unified Comfort Panel hygienic
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Unified Comfort Panel hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1200 Unified Comfort Panel neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Comfort Pro for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Comfort Pro for support arm (expandable, round tube) and extension unit
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Comfort Pro for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Comfort Pro neutral design for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (expandable, round tube) and extension
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Comfort Pro neutral design for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Unified Comfort Panel
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Unified Comfort Panel hygienic
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Unified Comfort Panel hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1500 Unified Comfort Panel neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Comfort Pro for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Comfort Pro for support arm (expandable, round tube) and extension unit
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Comfort Pro for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Comfort Pro neutral design for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (expandable, round tube) and extension
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Comfort Pro neutral design for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Unified Comfort Panel
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Unified Comfort Panel hygienic
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Unified Comfort Panel hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP1900 Unified Comfort Panel neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Comfort Pro for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Comfort Pro for support arm (expandable, round tube) and extension unit
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Comfort Pro for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Comfort Pro neutral design for stand (expandable, flange at the bottom)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (expandable, round tube) and extension
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Comfort Pro neutral design for support arm (not extendable, flange on top)
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Unified Comfort Hygienic
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Unified Comfort Hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Unified Comfort Panel
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP2200 Unified Comfort Panel neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP700 Unified Comfort Panel
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP700 Unified Comfort Panel hygienic neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIMATIC HMI MTP700, Unified Comfort Panel neutral design
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIPLUS HMI MTP1000 Unified Comfort
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIPLUS HMI MTP1200 Unified Comfort
  • Default status: unknown
  • 0 up to but excluding * (affected)
SiemensSIPLUS HMI MTP700 Unified Comfort
  • Default status: unknown
  • 0 up to but excluding * (affected)

Timeline

  1. 13 Oct 2026 Published

Weakness

References